SeaHunter Boats | Center Console Fishing Machines

The Center Console Advantage

SeaHunter center console boats are an adaptable type of vessel that can be used for a variety of activities. These boats are typically single-decked with an open hull and a center oriented console. Some models have cabins located in the bow of the boat but the main feature of center consoles is the boat deck. The open concept allows for easy maneuverability and ensures that nearly every feature of the vessel is within reach.

Fishing with Center Console Boats

Once upon a time, a 25ft boat with twin motors was an exceptionally sized vessel. Now, we have center console boats equipped with quad motors that can hold 700 gallons of fuel. These boats, like the ones manufactured by SeaHunter Boats, have completely changed the game. Not only are center console boats absolutely perfect for fishing, but they allow anglers to fish for a variety of species and explore different ecosystems like never before.

In addition to superior versatility and range, center console boats possess unmatched fishability. For example, if you hook a fish at the transom, you can easily move around the boat to the bow if the fish makes a run. You can cast from virtually anywhere on the boat, utilize an outrigger setup for trolling, and run kites off of any end of the boat.

SeaHunter Boats

SeaHunter Boats was formed in 2002 with performance, control, and comfort as its driving foundational elements. Prior to founding SeaHunter, Ralph Montalvo owned and operated the largest FAA repair company in the United States. As a result, SeaHunter was established on the basis of a strong aerospace heritage. By using the most innovative technology and advanced materials, SeaHunter exceeds NMMA (National Marine Manufacturer Association) standards.

These boats are designed for professionals and weekend warriors alike. From the bow to the stern of each and every SeaHunter, every detail has been perfectly engineered for both functionality and safety.

Which Model is Right for Me?

SeaHunter offers an array of center console boats that are perfect for a multitude of conditions.


The SeaHunter 45 is a quad powered behemoth equipped with three large live wells. Complete with 2800 maximum horsepower, the SeaHunter Tournament 45 is capable of reaching 60 mph speeds. If you’re looking for a boat to take you 600 miles on a single tank in any condition, the Tournament 45 is your vessel.


The hull of the Tournament 39 is a true deep-V design which ensures an unbelievably smooth ride. With several power options and outboard configurations, it’s easy to see why the Tournament 39 has been SeaHunter’s most popular center console boat for years.


The Tournament 35 is an excellent mid-30 foot center console boat that does not sacrifice comfort or storage. With more than 400 gallons of total fuel capacity this vessel is ideal for your next offshore adventure.


If you are looking for the features of a larger center console packed in a smaller size, then you need to check out the Tournament 33. Despite its compact design, the Tournament 33 boasts fully insulated fish boxes and three standard live wells. For a smaller center console boat loaded with features, the Tournament 33 finds a sweet spot.


Versatile, speedy, and comfortable, the Tournament 31 by SeaHunter is one of the best 31-foot center console boats on the market. Anglers wanting a vessel for drift, kite, and bottom fishing, look no further than the Tournament 31.


Perfect for wherever your fishing takes you, the Floridian 28 was designed for anglers that want it all. Its deck layout is modeled after SeaHunter’s larger models meaning lots of storage for bait and gear.

Center console boats can be used for lots of different activities due to their versatility. However, make no mistake, these modern-day center console boats are fishing machines. Boats from companies like SeaHunter have changed the game while providing anglers with everything they need to go farther and fish longer.

Tying a Leader Doesn’t Have to Be Hard

Easy Knots to Tie Fishing Leaders

Learning how to tie leaders is every bit as important as choosing the right rod or choosing the right line. While tying leaders at first may appear intimidating, with a few easy knots, you can tie virtually any leader you need. 

Tying a leader basically means attaching a clear piece of either monofilament line or fluorocarbon line, to a colored braided line. The reason you want to add this clear piece of line is so that spooky fish such as snook, redfish, bonefish or tarpon do not see your braided line in clear water.


For most inshore saltwater applications a wind-on leader is used. A wind-on leader is called such because you are reeling the leader through the guides. 

First, tie a loop called a spider hitch in your braid, where you make a loop with your braid and go through it five times. It is a misconception that a bimini twist knot is needed. Because you are tying braid and not monofilament line, a spider hitch knot works perfectly. 

Next, choose your leader material. The line you choose is up to you, but for this application, 20lb soft monofilament is best as it will slide in and out of the guides smoothly. Length of the leader is also something you need to decide on based upon water clarity, and target species among other things. Cut your leader to your specific application, however, for this application fishing around mangrove forests, about 3 feet is sufficient.

Attach your leader material to the braided loop you created with a knot called the no-name knot. Stick the tag end of your leader through the loop, and wrap it about seven times. It helps to pinch the loop and tag end as you are doing this. Then, take the tag end that you just wrapped, and go through the initial braided loop that you came through. 

An important thing to get in the habit of doing is to wet the knot with your mouth before pulling it tight. This prevents abrasions and allows it to tighten smoothly when you cinch it tight. Cut off any excess tag. You now have the leader attached to your braided line with a knot that is small enough to slide in and out of the guides without affecting your cast. 

Depending on what you are fishing for, you may want to add a bite tippet to your leader. Fish with teeth have no problem cutting through thinner diameter line. A bite tippet ensures that you keep your lure and catch your fish. Keep in mind the action of your lure when choosing the line for your bite tippet. Fluorocarbon is denser than monofilament and can affect the action of your lure.


So for this application with a small jerkbait using 40lb monofilament line would be best. The length needs to be long enough to prevent break-offs but not too long to affect your cast– around ten to twelve inches. To attach the 40lb bite tipped to your 20lb leader a simple blood knot works. 

The last part of tying this leader setup is attaching your bite tippet to your lure. Since you want the most action possible on your lure, you will tie a knot with a non-slip loop. Put your line through the lure’s eyelet and bring the overhand knot right up to the eyelet. Pinch it off and make one and a half turns with the tag end and go through the overhand that you initially make. Now your lure can swing freely with the most enticing action it can make. 

With the knowledge of how to tie a leader, you can not only trick that fish of a lifetime, but you can prevent break offs and cast efficiently all day long, ensuring you have the best time of the water possible.

How To Understand A Fishing Rod’s Power

Identifying A Rod’s Power

To be a successful fisherman, it is vital that you understand what a fishing rod’s power is. Though many rods may look the same, they are actually quite different. Each rod has its own unique characteristics that apply to an application. One such characteristic is power. Understanding what power means is essential when choosing a fishing rod to buy.

Power is simply the amount of resistance the blank of a rod gives into flexing as you throw a bait. To identify what power a rod is, and other characteristics such as height, and action, look above the rod’s handle. Printed on the rod will be information about the rod’s specifications. Power can be identified in different ways, though typically it will be listed from ultra light (UL) to extra heavy (XH).  

Some rod companies, such as Temple Fork Outfitters, make it easy to identify a rod’s power by having their own simple coding system. TFO provides a scale from 1 to 7, with 1 being ultra light and 7 being extra heavy.


Identify What Power Rod You Need

After identifying a rod’s power and understanding the naming system, you must understand the application to figure out what power rod you need. As mentioned before, power is the amount of resistance a rod gives into flexing.  

A rod that is made with an ultralight or light power, such as the Temple Fork Outfitters Inshore 692, will flex with less weight. This rod is ideal for lighter lures such as a small 1/8 oz bonefish jig.  

The same concept is true for a heavier power rod like the TFO Inshore 795. A heavy lure, such as a large plug, is required to “load up”, or flex, a heavy rod. If you are throwing a light weight jig on a heavy power rod, the rod will not load up to launch that lure and you will find it difficult to cast at all.  

Likewise, if you throw a heavy lure on a light rod, it will feel clunky and slow. This is because the rod is over-flexing from the weight of the lure and lacks the “backbone” or power to get that heavy lure out there efficiently. Potentially doing so could also end up breaking your rod as the heavy lure overburdens the blank.

It is important when you rig your rods that you put the right bait with the right rod with the right application. Doing so means that you keep in mind what type of fish you are targeting. A heavy rod can handle the weight of a tarpon, or large snook bending the rod during a fight, just as it can handle throwing large lures. Whereas a light power rod would snap under the pressure, but allows you to feel more fight, and in turn have more fun, from catching smaller fish. 

Knowing what kind of cover you will be fishing in is equally important. If you are fishing heavy brush or around docks, a heavy rod is vital. A heavy rod’s backbone will help you pull fish out of that cover without straining or breaking the rod.  The same concept works the other way around; if you are throwing that 1/8 oz. jig for bonefish on sandy flats, a light rod would be the best application.

Now that you understand what a fishing rod’s power is and how to pick the right power rod for an application, you are certain to know which rod to buy and to find success on the water.